skip to main content

Home > Brodit Step 1 > Apple > iPad 2 (A1395, A1396, A1397) > Holders > MultiStand

MultiStand view larger image

MultiStand for Apple iPad 2 (A1395, A1396, A1397)

Mounting Adapter and Screws Included. With spring stud locking. For OtterBox Defender Series.

For Apple iPad 2 (A1395, A1396, A1397) in all countries. (Item # 215520)

£49.99 inc. VAT

In Stock: 1 | Click to check lead time

1 available from our UK warehouse, order before 15:30 Mon-Fri for same day despatch (excluding holidays).
0 on order currently in transit from manufacturer.
More available to order with a lead time of 7-10 working days.

When using the MultiStand it is easier to carry the iPad around with you. Convenient to use anywhere at home, in the car or in the office. It diminishes the risk to drop it, since the stand is easier to grip than the device itself. You can use the stand in several angles, just adjust the position depending on area of use. Also adapted for use in the lap. Made of black ABS plastic.

You can connect e.g. a charging cable to the iPad when it is in place in the stand, all buttons and connectors are easy accessable. You can easily switch between landscape and portrait mode.

You can attach the stand onto a wall, or any other place, by using the enclosed mounting adapter. If you want to be able to attach the stand onto more than one place, you can buy several mounting adapters (see item no 215461).

Tablets should not be installed onto a carís dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the carís dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.

An installation of a tablet onto a vehicleís dashboard is always done on the customerís own responsibility. Brodit recommends to use tablets on the carís headrest, installed onto a Brodit headrest mount.

Also Suitable for:
For Apple iPad 2 (A1395, A1396, A1397) in all countries.
For Apple iPad 3rd Gen (A1416, A1430, A1403) in all countries.
For Apple iPad 4th Gen (A1458, A1459, A1460) in all countries.
For Apple iPad With Retina (Lightning Connector) in all countries.

Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. The multi stand. To install the multi stand: Place the mounting adapter into desired position and screw it into place with the enclosed screws. Place the iPad above the mounting adapter and press it downward so the mounting adapter fits into the groove. Press until you hear/feel it snaps into place. To remove the holder: Pull the holder straight upward, away from the mounting adapter.

2. Slide the device sideways carefully into the holder.

3. Press the spring stud locking device sideways onto the left part of the holder.

4. The holder is in place in upright, horizontal position.

MultiStand MultiStand MultiStand MultiStand