skip to main content

Home > Brodit Step 1 > Apple > iPhone 2G > Holders > Holder for Cable Attachment

Holder for Cable Attachment view larger image

Holder for Cable Attachment for Apple iPhone 2G

For after-market cable. With tilt swivel. With plush coating.

For Apple iPhone 2G in all countries. (Item # 915168)

£39.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the PDA automatically when you put your PDA in the holder so you do not have to connect it manually each time. (Cable not included). Please compare the connector on the picture so you know you will get the correct holder for your cable.

The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

Also Suitable for:
For Apple iPhone 2G in all countries.

Installation Instructions

Please read all instructions and look at the pictures before attaching the holder.

1. Installation of cable: Remove the back piece from the holder. Place the holder with the backside upwards. Press on the button on the connector, in the same time place the connector into the lower part of the holder. The mark pointing downwards, so you can not see it when placing the connector into the holder.

2. Place the back piece over the connector, make sure the cable is in the correct position. Screw the back piece into place. The cable is in place.

3. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder is in place.

Holder for Cable Attachment Holder for Cable Attachment Holder for Cable Attachment Holder for Cable Attachment