skip to main content

Home > Brodit Step 1 > Apple > iPhone 3GS > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Apple iPhone 3GS

With Cigarette Lighter Cable and USB Cable. Apple approved cable. For a more secure upright and horizontal position. Padded.

For Apple iPhone 3GS in all countries. (Item # 521023)

Brodit special order product, please contact us for details.

This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright position and a horizontal position - simply turn the holder into desired position. When installing, place the holder in the desired position (upright/horizontal) that you will be using as standard. The holder provides a more secure upright and horizontal position than a standard holder. By using an active holder you will always have a fully charged battery. The holder provides a neat and easy installation and the fact that the cable exits from the cab gives a cleaner look. The holder also provides a more secure upright and horizontal position than a standard active holder.
 
The active holder comes with a USB plug at the end of the cable, which is plugged into a power adapter for connection to the vehicle's 12 Volt socket. If you have a vehicle with USB stereo interface you can disconnect the power adapter and  connect holder USB plug directly to the stereo USB port for charging and playing music from the iPhone.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
Your iPhone automatically connects to the charging connector every time you dock it in the holder. The active holder is equipped with an Apple-approved cable. The active holder is attached to a tilt swivel, which means you can adjust the angle of the device for better viewing and to avoid light reflection on the screen.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


Also Suitable for:
For Apple iPhone 3G in all countries.
For Apple iPhone 3GS in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate.

2. To place the device in the holder: Place the bottom part of the device into the holder. Press the top of the device forward and in the same time slide the device downward into place in the holder.
To remove the device from the holder: Press the upper part of the holder forward. When the device is set free, lift it upward out of the holder.

3. You can easily switch between an upright and a horizontal position, simply by turning the holder into desired position. Note: Cable comes out from the back of the holder instead of the bottom.

4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug