skip to main content

Home > Brodit Step 1 > Apple > iPhone 3GS > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Apple iPhone 3GS

With tilt swivel. With USB cable. Apple approved charging cable. Adjustable holder, fits devices with skins.

For Apple iPhone 3GS in all countries. (Item # 521106)

Brodit special order product, please contact us for details.

Use an active holder for your iPhone while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient! The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket. If you have a car with USB interface you can disconnect the cig-plug from the holder’s cable in order to get a USB-cable which you can connect directly to the USB connector in your vehicle.
 
Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.
 
The device automatically connects to the charging device every time you put it in the holder. The active holder is equipped with an Apple-approved cable. The active holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


Also Suitable for:
For Apple iPhone 3G in all countries.
For Apple iPhone 3GS in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder. The holder in the installation pictures may look slightly different from the one you have received. However, the same instructions apply.

1. To adjust the holder to your unit: Loosen the screws on the back side of the holder, so the sides of the holders can be adjusted.

2. Place the unit in the holder and press the sides together so the unit is firmly in place. Screw on the screws on the back side of the holder.

3. To install the holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug