skip to main content

Home > Brodit Step 1 > Apple > iPhone 3GS > Holders > Holder for Cable Attachment

Holder for Cable Attachment view larger image

Holder for Cable Attachment for Apple iPhone 3GS

For Griffin PowerJolt cable. Padded.

For Apple iPhone 3GS in all countries. (Item # 915255)

£39.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the phone automatically when you put your unit in the holder so you do not have to connect it manually each time. (Cable not included).

Not for PowerJolt SE. The holder Fits only the old Griffin PowerJolt cable with release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.

Also Suitable for:
For Apple iPhone 3G in all countries.
For Apple iPhone 3GS in all countries.

Installation Instructions

Please read all instructions and look at the pictures before attaching the holder.

1. Installation of cable: Place the holder with the backside upwards. Place the connector into the lower part of the holder. Place the back piece over the connector, make sure the cable is in the correct position. Screw the back piece into place using the removed screws. The cable is in place.

2. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws.

3. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder in place, with cable in place.

Holder for Cable Attachment Holder for Cable Attachment Holder for Cable Attachment Holder for Cable Attachment