skip to main content

Home > Brodit Step 1 > Apple > iPhone 4 > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Apple iPhone 4

With tilt swivel. With USB cable. Apple approved charging cable. For Otterbox Defender Series.

PLEASE NOTE: THIS HOLDER IS ONLY COMPATIBLE FOR A DEVICE WITH AN OTTERBOX DEFENDER CASE.

For Apple iPhone 4 in all countries. (Item # 521378)

£64.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cig-plug cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The holder is made of ABS plastic. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for iPhone with Otterbox Defender Series case.

The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. You can tilt the holder 22 in each direction. Attach onto ProClip Mounting Platform.

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


Also Suitable for:
For Apple iPhone 4 in all countries.
For Apple iPhone 4S in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

Important note!
Before using your OtterBox case with the Brodit holder we recommend the removal of the connector cover from the OtterBox case, once this connector cover is removed from the case the device can be inserted and removed from the holder with ease. Removing the OtterBox Connector Cover: 1. Lay the rubber skin of the OtterBox case on a cutting surface so the connector cover is flat on the surface. 2. Using a ruler lay it flat across the case so only the rubber connector cover part to be removed is visible. 3. Using a sharp knife blade cut along the ruler to remove only the rubber connector cover. 4. Refit the OtterBox case to your device and then test in your Brodit holder.

Mounting the holder: 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted. 4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug