skip to main content

Home > Brodit Step 1 > Apple > iPhone 4 > Holders > Holder with external antenna connection

Holder with external antenna connection view larger image

Holder with external antenna connection for Apple iPhone 4

Active holder with USB/cig-plug, with tilt swivel. Fits for devices WITH skin. Built-in inductive antenna (FME-male). MultiMoveClip and screws included.

For Apple iPhone 4 in all countries. (Item # 548400)

£109.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

Brodit's holder with external antenna connection provides a considerably better and more reliable mobile coverage. Works both in rural as in urban areas, in vehicles and in buildings.

Attach an external antenna onto your vehicle or in your window and connect it to the antenna cable attached to the holder (external antenna is not included). The external antenna will pick up on even the faintest signal, too weak to be recognized by your device. The signal is then transmitted wirelessly to your device via the built-in inductive antenna. It can take a while for your device to find the signal after placing it in the holder (maximum 1 minute). The holder also charges your device, it comes with a USB/cig-cable for connection to your vehicle's USB/12V-socket.

The holder is equipped with a tilt swivel and is to be mounted into a MultiMoveClip which you attach onto ProClip Mounting Platform for a safe, convenient in your vehicle. Also perfect for use in boats and summer houses. The holder is developed and produced in Sweden. Made of black Acetal plastic. Pattern protected RCD 00199475 + RCD 002001164. Please see leaflet for more information.

- Fits devices WITH skin (also Apple original Bumper)
- With USB/Cig-cable, 12V
- With external antenna connection (FME-male) (external antenna not included)
- Built-in inductive antenna
- Apple aprroved cable
-Tilt swivel, adjustable 15
- Designed and manufactured in Sweden


Also Suitable for:
For Apple iPhone 4 in all countries.
For Apple iPhone 4S in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. Place the MultiMoveClip onto the desired position. Screw the MultiMoveClip into place with the enclosed screws.

2. To attach the holder into place: Slide the holder straight downward onto the MultiMoveClip so you hear/feel it snaps into place.
To remove the holder: Press the latch on the MultiMoveClip and press/lift the holder straight upward and out of the MultiMoveClip.

3. To place the device in the holder: Place the upper part of the device in the upper part of the holder and press it upward so the top part of the holder slides upward. Press the lower part of the device forward into the holder. When the device is placed straight over the connector in the holder, take the device straight downward so the connector is connected.
To remove the device from the holder: Press the device straight upward so the top part of the holder slides upward. When the device is set free from the connector, pull the lower part of the device toward you and slide the device downward out of the holder.

4. The holder is in place.

Holder with external antenna connection Holder with external antenna connection Holder with external antenna connection Holder with external antenna connection