skip to main content

Home > Brodit Step 1 > Apple > iPhone 7 > Holders > Passive holder with tilt swivel

Passive holder with tilt swivel view larger image

Passive holder with tilt swivel for Apple iPhone 7

Adjustable holder. Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm.

For Apple iPhone 7 in all countries. (Item # 511688)

£29.99 inc. VAT

In Stock: 17 | Click to check lead time

17 available from our UK warehouse, order before 15:30 Mon-Fri for same day despatch (excluding holidays).
0 on order currently in transit from manufacturer.
More available to order with a lead time of 7-10 working days.

Keep your iPhone in a passive holder on the road and you will always have it within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. Your iPhone is held securely in place in an upright position for maximum cellular reception. You can connect an Apple Lightning cable and a headset to your iPhone while placed in the holder.
 
In order to find the correct holder for your skin: Measure your skin and compare with the dimensions for each holder. To use the holder, you first set the width to fit for your skin, then you can easily place your iPhone in the holder.
 
Fits devices with skin that has the following dimensions: Width: 75-89 mm, Thickness: 9-13 mm. (May fit for skins thicker than 13 mm, depending on shape/design of the edges).
 
The holder is made of black ABS plastic. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder is equipped with a tilt swivel so you can adjust the angle of your device in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.


Also Suitable for:
For Apple iPhone 6 in all countries.
For Apple iPhone 6 Plus in all countries.
For Apple iPhone 6S in all countries.
For Apple iPhone 6S Plus in all countries.
For Apple iPhone 7 in all countries.
For Apple iPhone 7 Plus in all countries.
For Apple iPhone 8 in all countries.
For Apple iPhone 8 Plus in all countries.
For Apple iPhone X in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. To adjust the holder for your device: Loosen the screws on the front side of the holder, so the sides of the holders can be adjusted. Place the device in the holder and press the sides together so the device is firmly in place. Tighten the screws on the front side of the holder.

2.To install the holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel