skip to main content


10% OFF ALL Brodit use search below:

Home > Brodit Step 1 > Apple > iPhone 8 > Holders > Holder for Cable Attachment

Holder for Cable Attachment view larger image

Holder for Cable Attachment for Apple iPhone 8

For use with Apple original Lightning to USB Cable. With tilt swivel. Padded

For Apple iPhone 8 in all countries. (Item # 714009)

£35.99 inc. VAT
(Was £39.99)

In Stock: 1 | Click to check lead time

1 available from our UK warehouse, order before 15:30 Mon-Fri for same day despatch (excluding holidays).
2 on order currently in transit from manufacturer.
More available to order with a lead time of 7-10 working days.

This holder for cable attachment can, combined with an Apple cable, be used for charging your iPhone. First you mount the cable into place onto the holder, then it automatically connects to your iPhone every time you place the device in the holder. You have full access to the camera and all buttons and outlets when the device is in the holder. The iPhone is held securely in place in an upright position for maximum cellular reception.

Note! Cable not included.
The cable attachment holder can be combined with the Apple original Lightning to USB Cable that came with your iPhone (Apple article. no. MD818AM/A. You can charge you iPhone by connecting it to the carís USB socket, or use it with a USB/cig-plug adapter for the carís 12V socket.

The holder is padded. This means it has a plush coating which protects your device from scrathing. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for bare iPhone without skin/case.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20į and swivels 360į. Mounting plate 42x50 mm with AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.

Dimensions: 72 x 90 x 51 mm (W x H x D mm)
Weight: 74 g

Also Suitable for:
For Apple iPhone 8 in all countries.

Installation Instructions

Please read all of the instructions and look at the pictures before installing.

1. Place the connector of the cable in the hole in the lower part of the holder. Carefully press the connector upward so it passes the notches and goes all the way into the hole. Press until you hear/feel the connector snap into place in the holder.

2. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Holder for Cable Attachment Holder for Cable Attachment Holder for Cable Attachment Holder for Cable Attachment