skip to main content

Home > Brodit Step 1 > Apple > iPhone 8 > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Apple iPhone 8

With USB cable and cig-plug adapter. Apple approved charging cable. With tilt swivel. Padded.

For Apple iPhone 8 in all countries. (Item # 721009)

£65.99 inc. VAT

In Stock: 2 | Click to check lead time

2 available from our UK warehouse, order before 15:30 Mon-Fri for same day despatch (excluding holidays).
0 on order currently in transit from manufacturer.
More available to order with a lead time of 7-10 working days.

Use an active holder for your iPhone on the road and you will always have a freshly charged battery! In addition, you will always have your iPhone within easy sight and reach. Safe, comfortable and convenient! The holder has a neat and discreet design which blends well with the vehicle's interior. You have full access to the camera and all buttons and outlets when the device is in the holder. The iPhone is held securely in place in an upright position for maximum cellular reception.

The holder is equipped with an Apple approved cable for connection to the vehicle's 12 Volt socket. When you place the iPhone in the holder, it automatically connects to the charging unit. If you have a car with USB interface, you can disconnect the cig-plug adapter from the holder's cable in order to get a USB-cable to connect directly to the USB connector in your vehicle.

Important note!
In order to be able to transmit audio files from your device through the USB-cable this feature must be supported by the stereo in your car. This is easily tested by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless.

The holder is padded. This means it has a plush coating which protects your device from scrathing. The holder has a perfect fit. It is easy to put the device into the holder, and just as easy to take it with you when leaving the vehicle. The holder fits for bare iPhone without skin/case.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20 and swivels 360. Mounting plate 42x50 mm with AMPS-holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.

Dimensions: 72 x 90 x 51 mm (W x H x D mm)
Weight: 124 g
Cable length: 132 cm

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).

Also Suitable for:
For Apple iPhone 8 in all countries.

Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug