skip to main content

Home > Brodit Step 1 > Apple > iPod 3rd Generation 40 GB > Holders > Holder with Pass-Through Connector

Holder with Pass-Through Connector view larger image

Holder with Pass-Through Connector for Apple iPod 3rd Generation 40 GB

Padded.

For Apple iPod 3rd Generation 40 GB in all countries. (Item # 849846)

£69.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

All cables that can be used with the iPod can also be used with the holder, for example a charging cable or an interface cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the iPod in the holder. (Cable not included)
 
You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.


Also Suitable for:
For Apple iPod 3rd Generation 10 GB in all countries.
For Apple iPod 3rd Generation 15 GB in all countries.
For Apple iPod 3rd Generation 20 GB in all countries.
For Apple iPod 3rd Generation 30 GB in all countries.
For Apple iPod 3rd Generation 40 GB in all countries.
For Apple iPod 4th Generation 20 GB in all countries.
For Apple iPod 4th Generation 40 GB in all countries.
For Apple iPod 4th Generation Colour 20 GB in all countries.
For Apple iPod 4th Generation Colour 60 GB in all countries.
For Apple iPod 5th Generation Video 30 GB in all countries.
For Apple iPod 5th Generation Video 60 GB in all countries.
For Apple iPod 5th Generation Video 80 GB in all countries.
For Apple iPod Classic 120 GB in all countries.
For Apple iPod Classic 160 GB in all countries.
For Apple iPod Classic 2nd Generation 160 GB in all countries.
For Apple iPod Classic 80 GB in all countries.
For Apple iPod Photo 30 GB in all countries.
For Apple iPod Photo 40 GB in all countries.
For Apple iPod Photo 60 GB in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate. All cables that fit the device, can also be attached to the holder.

4. The holder is in place.

Holder with Pass-Through Connector Holder with Pass-Through Connector Holder with Pass-Through Connector Holder with Pass-Through Connector