skip to main content

Home > Brodit Step 1 > Apple > iPod 4th Generation Colour 20 GB > Holders > Holder for Cable Attachment

Holder for Cable Attachment view larger image

Holder for Cable Attachment for Apple iPod 4th Generation Colour 20 GB

For Griffin PowerJolt cable. Padded.

For Apple iPod 4th Generation Colour 20 GB in all countries. (Item # 514101)

£39.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

Holder with cable plug attachment. The cable is easy to attach to the holder, and then the cable connects to the iPod automatically when you put your unit in the holder so you do not have to connect it manually each time. (Cable not included).

Only for the new Griffin PowerJolt cable without release buttons on the side.

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform.


Also Suitable for:
For Apple iPod 2nd Generation 20 GB in all countries.
For Apple iPod 3rd Generation 20 GB in all countries.
For Apple iPod 3rd Generation 30 GB in all countries.
For Apple iPod 3rd Generation 40 GB in all countries.
For Apple iPod 4th Generation 20 GB in all countries.
For Apple iPod 4th Generation 40 GB in all countries.
For Apple iPod 4th Generation Colour 20 GB in all countries.
For Apple iPod 4th Generation Colour 60 GB in all countries.
For Apple iPod 5th Generation Video 30 GB in all countries.
For Apple iPod 5th Generation Video 60 GB in all countries.
For Apple iPod 5th Generation Video 80 GB in all countries.
For Apple iPod Classic 120 GB in all countries.
For Apple iPod Classic 160 GB in all countries.
For Apple iPod Classic 2nd Generation 160 GB in all countries.
For Apple iPod Classic 80 GB in all countries.
For Apple iPod Photo 30 GB in all countries.
For Apple iPod Photo 40 GB in all countries.
For Apple iPod Photo 60 GB in all countries.


Installation Instructions

Please read all instructions and look at the pictures before attaching the holder.

1. Installation of cable: Loosen the back piece from the back of the holder. Place the holder with the backside upwards. Place the connector into the lower part of the holder. The mark pointing downwards, so you can not see it when placing the connector into the holder.

2. Place the back piece over the connector, make sure the cable is in the correct position. Screw the back piece into place using the removed screws. The cable is in place.

3. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder in place, with cable in place.

Holder for Cable Attachment Holder for Cable Attachment Holder for Cable Attachment Holder for Cable Attachment