skip to main content

Home > Brodit Step 1 > Apple > iPod Touch 4th Generation > Holders > Passive holder with tilt swivel

Passive holder with tilt swivel view larger image

Passive holder with tilt swivel for Apple iPod Touch 4th Generation

Padded.

For Apple iPod Touch 4th Generation in all countries. (Item # 511191)

£25.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

With your iPod in a holder attached onto the dashboard it is always within easy reach -safe and convenient. It is easy to put the iPod in the holder, and to take it out of the holder. Attach onto a ProClip Mounting Platform.


Also Suitable for:
For Apple iPod Touch 4th Generation in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the holder.

1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.

3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel