skip to main content

Home > Brodit Step 1 > TomTom > Pro 7350 > Holders > Active Dock Holder with Tilt Swivel

Active Dock Holder with Tilt Swivel view larger image

Active Dock Holder with Tilt Swivel for TomTom Pro 7350

With straight cable for fixed installation.

For TomTom Pro 7350 in all countries. (Item # 215943)

£89.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

Holder with Active Dock. Keep your TomTom in the holder and it will be firmly in place within easy reach! You can attach a charging cable to the holder. When you have attached the cable to the holder you do not have to connect it manually to the device each time you put the GPS in the holder. Active holder for fixed installation. Gives a neat installation without loose cables hanging over the interior. The enclosed cable can not be used for TMC.

The original TomTom charging cable that is enclosed when you buy the device can be connected to the Active Dock. The Active Dock is equipped with a micro USB connector.

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Install over a 2 A fuse inside the dashboard. Professional installation recommended. 12/24 Volt. Attach onto ProClip Mounting Platform.

Charging specifications:
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green) , Ovp/Ocp/Output Short(Red)
Operating temperature: 0C ~ +40C
Storage temperature: -20C ~ +80C
RoHS compliant: ROHS


Also Suitable for:
For TomTom GO 520 New in all countries.
For TomTom GO 5200 in all countries.
For TomTom GO 620 in all countries.
For TomTom GO 6200 in all countries.
For TomTom GO Essential in all countries.
For TomTom GO Professional 520 in all countries.
For TomTom GO Professional 620 in all countries.
For TomTom GO Professional 6200 in all countries.
For TomTom GO Professional 6250 in all countries.
For TomTom Pro 7350 in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the mount.

1-2. Installation of the mount: Place the mount on desired position and screw it into place with the enclosed screws. Turn the mount in different angles in order to get to the holes.

3. Cables can be connected to the back side of the mount.

4. The mount is in place.

Active Dock Holder with Tilt Swivel Active Dock Holder with Tilt Swivel Active Dock Holder with Tilt Swivel Active Dock Holder with Tilt Swivel