skip to main content

Home > Brodit Step 1 > Zebra > ET51 10.1 > Holders > Mounting plate

Mounting plate view larger image

Mounting plate for Zebra ET51 10.1

Extension plate, for devices with rugged frame.

For Zebra ET51 10.1 in all countries. (Item # 215916)

£19.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

With an extension plate mounted onto your Zebra ET50/55 you can attach another smaller device and easily carry it with you. The extension plate is mounted onto the back of your device while carried in a rugged frame. The plate has pre-drilled AMPS-holes in order to with Brodit holders with tilt swivel. The extension plate can be placed on either right or left side on the device.

Dimensions: 120 x 86 x 9 mm (W x H x D mm).
Weight: 62 g


Also Suitable for:
For Zebra ET50 10.1 in all countries.
For Zebra ET50 8.3 in all countries.
For Zebra ET51 10.1 in all countries.
For Zebra ET51 8.3 in all countries.
For Zebra ET55 10.1 in all countries.
For Zebra ET55 8.3 in all countries.
For Zebra ET56 10.1 in all countries.
For Zebra ET56 8.3 in all countries.


Installation Instructions

Read all of the instructions and look at the pictures before installing.
Please note: The extension plate can be placed on either side of the rugged frame. Does only fit devices with the rugged frame with holes on the back.

1. Turn the device back side up in order to locate the holes on the back side of the rugged frame.

2. Place the extension plate over the holes.

3. Attach the extension plate using the enclosed screws.

4. The extension plate is in place.

Mounting plate Mounting plate Mounting plate Mounting plate