skip to main content

Home > Brodit Step 1 > Zebra > ET51 10.1 > Holders > Holder with lock.

Holder with lock. view larger image

Holder with lock. for Zebra ET51 10.1

Passive holder. With AMPS, Vesa 75/100 holes. Fits devices with rugged frame. 2 keys included.

For Zebra ET51 10.1 in all countries. (Item # 241671)

£174.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.

This holder is the perfect choice when you want to have your device securely locked in place and still easy accessible. The holder is made of extra strong plastic and is equipped with a lock. In order to remove the device from the holder you need a key (two keys are included). Attach the holder to any flat surface or a Pedestal Mount in a truck, distribution vehicle, warehouse etc. Predrilled AMPS and VESA standard holes. You have full access to the camera and all buttons and outlets when the device is in the holder.


Also Suitable for:
For Zebra ET50 10.1 in all countries.
For Zebra ET51 10.1 in all countries.
For Zebra ET55 10.1 in all countries.
For Zebra ET56 10.1 in all countries.


Installation Instructions

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Place the holder onto the desired position and screw into place with the enclosed screws.
 
2. To place the device in the holder: Place the lower part of the device in the holder, then flip/press the upper part forward so it snaps into place in the holder. Press the locking block downward. Press the button to lock.
 
3. To remove the device from the holder: Use the enclosed key to open the lock. Slide the lock upward. Press upwards on the upper part of the holder, in the same time pull the upper part of the device out from the holder and then lift the device up and out from the holder.
 
4. The holder is in place.

Holder with lock. Holder with lock. Holder with lock. Holder with lock.