skip to main content

BLACK FRIDAY - 10% DISCOUNT ON ALL PRODUCTS - ENTER BLACK17 AT CHECKOUT

Find your Brodit

Home > Rear Seat Entertainment > Brodit Headrest Mounts > Brodit headrest mount for standard seat posts 95 - 211mm

Brodit headrest mount for standard seat posts 95 - 211mm

Brodit headrest mount for standard seat posts 95 - 211mm

Ref: 811070

49.99 inc. VAT

Special order item, lead time from manufacturer is 7-10 working days.


Brodit headrest mount 811070 fits standard seat posts with the following measurements between the bars, minimum inner size 95 mm, maximum outer size 211 mm

The headrest mount securely attaches to the front seat posts to create a flat plastic plate to attach a Brodit tablet holder.  Brodit holders are sold separately and available as device specific or an adjustable universal option.

/live/products/811070-1_200.jpg/live/products/811070-2_200.jpg/live/products/811070-3_200.jpg/live/products/811070-4_200.jpg

Installation Instructions
  1. Use the enclosed tool to remove the screws in the headrest mount so you get two parts. Place the back part of the headrest mount onto the front side of the headrest. Place the other part of the headrest, equipped with a mounting plate, onto the back part of the headrest mount so the screws match the holes. Tighten the two screws a little bit, just so the headrest mount is in place.
  2. Use the other enclosed tool to loosen the screw underneath the headrest mount. Adjust the mounting plate into desired position. Tighten the screw underneath the headrest mount so the mounting plate is firmly in place.
  3. Adjust the height of the headrest mount into desired position. Tighten the screws so the headrest mount is firmly in place.
  4. The headrest mount is in place and ready for the second part, the tablet holder. 
Once in place the headrest mount is ready for the second part, a Brodit tablet holder, which are sold separately.