An active holder which is to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior! The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Attach onto ProClip Mounting Platform in your car.
With Molex adapter system. You can choose to use the holder as an active holder for charging of your device only, or to connect an adapter to the Molex connector for additional features. Then you can use the holder also for power supply of a GPS receiver or other own solutions (can not be used for data communication or audio connection).
The product is E-approved. 12/24 Volt. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended.
Input voltage: DC/10-30V
Charging voltage: DC/4.75-5.3V
Output current(Typ): 2.0A
Input & output protection: Input polarity reversal/Output over voltage/Output over current/Output short protection
LED charging indicator: Power input indicator(Green), Ovp/Ocp/Output short(Red)
Operating temperature: 0Â°C ~ +40Â°C
Storage temperature: -20Â°C ~ +80Â°C
RoHS compliant: ROHS
Important Note: The charger unit is fused internally with 2 A automotive re-settable thermal fuse, but if an external fuse is to be installed then connect a 2 A fuse holder and fuse inline with the Red wire close to the power source.
Route the cable from the holder into the vehicle dashboard and secure the charger unit in place with the adhesive tape provided. Ensure the charger unit is securely mounted behind the dashboard in a well ventilated area that does not get hot! Note: If you are connecting a GPS/Data device to the holder please ensure the charger unit is located in a position within easy reach of any GPS or charging adapters. Route the power cable from the charger unit to the power supply source in the vehicle and connect as follows: 1. Connect the White wire to a Negative Ground connection of the vehicle or the vehicle chassis. 2. Connect the Red wire to a 12/24 Volt power supply in the vehicle that is controlled by the ignition switch of the vehicle. How to mount the holder: 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate onto the desired position. 3. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted. 4. The holder is in place.
All orders received before 15:00, Monday - Friday (excluding holidays), will be despatched the same day, providing all of the ordered items are in stock.
If we cannot completely fulfil your order due to an item being unavailable from stock, your order will be held and despatched when the order is complete.
Royal Mail 1st Class
£5 - £49.99
Royal Mail 24 Service
£50 - 149.99
Royal Mail 24 Tracked
DPD Next Working Day
Orders will be shipped using our chosen delivery partner after considering size of order and location. Cost is £16.66.
Any customs or import charges are the responsibility of the purchaser. UK tax is removed at checkout.
As we ship to most countries and will choose an appropriate courier depending on the size of order and destination. Costs vary by country and are calculated in the checkout.
When goods are despached you will receive an email containing tracking information from the chosen courier company. Please allow upto 48 hours after goods have shipped to receive this notification.
Please understand that during peak periods - including Black Friday, Christmas and other holidays - same day shipments can be delayed.
Situations beyond our control may also affect despatch times - these include strike actions, adverse weather and industrial disputes.
For further details, do not hesitate to contact us