skip to main content

STATEMENT REGARDING COVID-19 - FAST SHIPPING STILL AVAILABLE

10% OFF ALL Brodit use search below:

Home > Brodit Step 1 > Ascom > d62 > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Ascom d62

With cig-plug adapter. With tilt swivel. For charging, no data transmission.

For Ascom d62 in all countries. (Item # 521889)

Brodit special order product, please contact us for details.

The active holder charges your battery when it is in the holder. The charging device connects to the d62 automatically when you put the device in the holder.
 
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes +2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip Mounting Platform.
 
Dimensions: 58 x 90 x 53 mm (W x H x D mm)
Weight: 144 g
Cable length (+ connector with plug 9,7 cm): 148,5 cm

This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge).


Also Suitable for:
For Ascom d62 in all countries.


Installation Instructions

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.
 
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
 
4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug