skip to main content

Home > Brodit Step 1 > Datalogic > DL-Axist > Holders > Passive holder with tilt swivel

Passive holder with tilt swivel view larger image

Passive holder with tilt swivel for Datalogic DL-Axist

3-point holder for a more secure hold. For device with rubber boot.

For Datalogic DL-Axist in all countries. (Item # 511834)

Brodit special order product, please contact us for details.

With your PDA in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the PDA in the holder, and to take it out of the holder. You can connect e.g. a charging cable to the PDA when it is in the holder.


Also Suitable for:
For Datalogic DL-Axist in all countries.


Installation Instructions

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Screw a few turns on the screw, just so the thread starts to pull. Pull the holder toward you and hold it slightly tensed, in the same time tighten the screw so the holder is pulled toward the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.
 
3. To place the device in the holder: Place the bottom part of the device into the holder. Press the top of the device forward and in the same time slide the device downward into place in the holder. To remove the device from the holder: Press the upper part of the holder forward. When the device is set free, lift it upward out of the holder.
 
4. The holder is in place.

Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel Passive holder with tilt swivel