skip to main content

Home > Brodit Step 1 > Kenwood > NX-340 > Holders > Active holder for fixed installation

Active holder for fixed installation view larger image

Active holder for fixed installation for Kenwood NX-340

Slim design with charger integrated in the holder.

For Kenwood NX-340 in all countries. (Item # 532387)

Brodit special order product, please contact us for details.

Are you using a two-way radio every day in your work? Then a Brodit active holder will make your days much easier! By keeping the device in an active holder, you will always have it within easy sight and reach while driving between jobs. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

The charging device is integrated in the holder itself, so there is no large charging box on the cable and LED indicator to show that charging is in progress, the indicator changes from red to green when fully charged. 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. Attach onto ProClip Mounting Platform.


Also Suitable for:
For Kenwood NX-340 in all countries.
For Kenwood NX-340 in all countries.
For Kenwood TK-2300 in all countries.
For Kenwood TK-2300 in all countries.
For Kenwood TK-3300 in all countries.
For Kenwood TK-3300 in all countries.


Installation Instructions

Charging Specifications:
Battery Chemistry: Li-ion or Li-Poly batteries
Input Voltage: 11-30 V
Charging Voltage: 8.4 V
Timer for Max. Charging Time: Automatic, stops at 8.4 V
Max. Charging Time: 2-3 hours depending on battery capacity
Rapid Charge: 1 A +/- 5%
Trickle Charge: 0 to 50 mA
LED Charging Indicator: LED Red to Green indicator
Temperature Control: Controlled by battery
RoHS Compliant: Yes
Input Transient Protected: Withstands +200V & -600V. A 2,5A fuse is mounted on the incoming supply.
Output Short Circuit Protected: The charger will supply a maximum current of 1 A which protects both the charger and the connected equipment. The current limit is set to standards of the producer and shall not be higher.

Active holder for fixed installation Active holder for fixed installation Active holder for fixed installation Active holder for fixed installation

Home > Brodit Step 1 > Kenwood > NX-340 > Holders > Active holder for fixed installation

Active holder for fixed installation view larger image

Active holder for fixed installation for Kenwood NX-340

Slim design with charger integrated in the holder.

For Kenwood NX-340 in all countries. (Item # 532387)

Brodit special order product, please contact us for details.

Are you using a two-way radio every day in your work? Then a Brodit active holder will make your days much easier! By keeping the device in an active holder, you will always have it within easy sight and reach while driving between jobs. The cables are to be connected inside the dashboard, this gives a discreet, neat installation without cables hanging over the interior.

The charging device is integrated in the holder itself, so there is no large charging box on the cable and LED indicator to show that charging is in progress, the indicator changes from red to green when fully charged. 12/24 Volt. The product is E-approved. Connect the power cable with a 2 A fuse. 2 A charger. Professional installation recommended. Attach onto ProClip Mounting Platform.


Also Suitable for:
For Kenwood NX-340 in all countries.
For Kenwood NX-340 in all countries.
For Kenwood TK-2300 in all countries.
For Kenwood TK-2300 in all countries.
For Kenwood TK-3300 in all countries.
For Kenwood TK-3300 in all countries.


Installation Instructions

Charging Specifications:
Battery Chemistry: Li-ion or Li-Poly batteries
Input Voltage: 11-30 V
Charging Voltage: 8.4 V
Timer for Max. Charging Time: Automatic, stops at 8.4 V
Max. Charging Time: 2-3 hours depending on battery capacity
Rapid Charge: 1 A +/- 5%
Trickle Charge: 0 to 50 mA
LED Charging Indicator: LED Red to Green indicator
Temperature Control: Controlled by battery
RoHS Compliant: Yes
Input Transient Protected: Withstands +200V & -600V. A 2,5A fuse is mounted on the incoming supply.
Output Short Circuit Protected: The charger will supply a maximum current of 1 A which protects both the charger and the connected equipment. The current limit is set to standards of the producer and shall not be higher.

Active holder for fixed installation Active holder for fixed installation Active holder for fixed installation Active holder for fixed installation