skip to main content

Home > Brodit Step 1 > Navman > N40i > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Navman N40i

With tilt swivel. For devices with a TMC module.

For Navman N40i in all countries. (Item # 215270)

Brodit special order product, please contact us for details.

The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Active holder with a cig-plug. Connects to the vehicle's cigarette lighter socket. 12 Volt. Fits devices with a TMC module. (TMC module not included).

You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform.


Also Suitable for:
For Navman F20 in all countries.
For Navman ICN 530 in all countries.
For Navman ICN 720 in all countries.
For Navman N20 in all countries.
For Navman N40i in all countries.
For Navman N60i in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures before attaching the mount. The mount can be used with devices both with and without a TMC device.

1. For devices without TMC: Loosen the screw in the original mount and pull the mount apart so you get three parts. Place the 215270- mount in the desired position and attach it with the enclosed screws. Place the locking ring onto the 215270-mount. NOTE: It is important to put the ring the right way onto the mount (as shown in picture).

2. Press the original mount onto the 215270-mount. Lock the original mount onto the 215270-mount by tightening the locking ring. Attach the charging cable.

3. For devices with TMC: The same installation procedure applies as for devices without TMC.

4. The mount is in place, with device in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug