skip to main content

Home > Brodit Step 1 > TSC > Alpha-3RW > Holders > Mount

Mount view larger image

Mount for TSC Alpha-3RW

With MultiMoveClip.

For TSC Alpha-3RW in all countries. (Item # 216073)

Brodit special order product, please contact us for details.

This mount offers an easy and secure way to mount your printer. With quick release MultiMoveClip, it makes it easy to move your printer between locations. Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perfect, firm fit. Attach onto a Pedestal Mount or a high strength ProClip mounting platform.

With AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.


Also Suitable for:
For TSC Alpha-3RW in all countries.
For TSC Alpha-3RW in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures beore attaching the holder.
 
1. To attach the holder onto the printer: Loosen the screw in the back of the holder and remove the small lower part. Hook one side of the upper part of the holder onto the upper part of the printer, then hook the other side into place. Flip the holder downward so it rests along the back side of the holder. Slide the small lower part into place and attach it with the screw. The holder is in place onto the printer.
 
2. To attach the MultiMoveClip: Place the MultiMoveClip in the desired position and attach it with the enclosed screws.
 
3. To put the holder in place: Place the holder above the MultiMoveClip and press it straight downward so it snaps into place.
To remove the holder: Press on the release lever on the MultiMoveClip to set the holder free, and lift the holder straight upward.
 
4. The product is in place.

Mount Mount Mount Mount

Home > Brodit Step 1 > TSC > Alpha-3RW > Holders > Mount

Mount view larger image

Mount for TSC Alpha-3RW

With MultiMoveClip.

For TSC Alpha-3RW in all countries. (Item # 216073)

Brodit special order product, please contact us for details.

This mount offers an easy and secure way to mount your printer. With quick release MultiMoveClip, it makes it easy to move your printer between locations. Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perfect, firm fit. Attach onto a Pedestal Mount or a high strength ProClip mounting platform.

With AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.


Also Suitable for:
For TSC Alpha-3RW in all countries.
For TSC Alpha-3RW in all countries.


Installation Instructions

Please read all of the instructions and look at the pictures beore attaching the holder.
 
1. To attach the holder onto the printer: Loosen the screw in the back of the holder and remove the small lower part. Hook one side of the upper part of the holder onto the upper part of the printer, then hook the other side into place. Flip the holder downward so it rests along the back side of the holder. Slide the small lower part into place and attach it with the screw. The holder is in place onto the printer.
 
2. To attach the MultiMoveClip: Place the MultiMoveClip in the desired position and attach it with the enclosed screws.
 
3. To put the holder in place: Place the holder above the MultiMoveClip and press it straight downward so it snaps into place.
To remove the holder: Press on the release lever on the MultiMoveClip to set the holder free, and lift the holder straight upward.
 
4. The product is in place.

Mount Mount Mount Mount