skip to main content

BLACK FRIDAY SALE UP TO 20% OFF

Home > Brodit Step 1 > Zebra > TC52 > Holders > Active holder with cig-plug

Active holder with cig-plug view larger image

Active holder with cig-plug for Zebra TC52

With tilt swivel. Fits device without Zebra Original Rugged Boot.

For Zebra TC52 in all countries. (Item # 512927)

£89.99 inc. VAT
(Black Friday Sale - Was £89.99)

Special order item, lead time from manufacturer is 7-10 working days.

BLACK FRIDAY SALE NOW ON

The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. With straight cable. Attach onto a ProClip Mounting Platform.
 
Dimensions: 81 x 112 x 63 mm (W x H x D mm)
Weight: 195 g
Cable length (Holder+pigtale 25cm, cabel+Cig 107cm.


Also Suitable for:
For Zebra TC51 in all countries.
For Zebra TC52 in all countries.
For Zebra TC56 in all countries.
For Zebra TC57 in all countries.


Installation Instructions

Please read all of the instructions and  look at the pictures before attaching the holder.
 
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
 
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.
 
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place. Tighten the screw firm at first, then loosen it a bit so the holder is firmly in place, but still can be adjusted.
 
4. The holder is in place.

Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug Active holder with cig-plug